Discover the Exmark Turf Tracer S-Series Mower
 
With the Exmark Turf Tracer S-Series commercial walk-behind mower, you can choose from a variety of rugged engines. Then, match that power to cutting decks in 36-, 48-, and 52-inch widths. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
 
Starter
Electric
 
Steering Control
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
 
Front Caster Tires
9 x 3.5-4, smooth-tread, semi-pneumatic.
 
Drive Tires
16 x 7.5-8, 4-ply Turf Master®
 
Safety Package
Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
 
Parking Brake
Lever-actuated mechanical compression.
 
Electrical
12-volt battery with 15-amp alternator.
 
Standard Features
Engine hour meter
 
Engine Brand
Kawasaki
 
Transmission Speeds
Infinitely Variable
 
Transmission Brand
Hydro-Gear
 
Engine Model
FS600V
 
Engine Displacement
603
 
Engine Series
V-Twin
 
Fuel System
Carbureted
 
Speed
Infinitely variable speed selection from 0– 6.2 mph forward, 0–2.2 mph reverse
 
Transmission
Hydrostatic
 
Drive
Hydro-Drive
 
Engine Spec
AS26-R
 
Engine Speed
3,600 rpm
 
Air Filter
Standard Engine Manufacturer's air filter
 
Fuel Capacity
5-gallon single fuel tank with single fill location
 
Drive Description
Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" tapered shafts.
 
Fuel Type
Gas Carbureted
 
PTO Engagement
Electromagnetic 105-ft-lb clutch
 
Drive Wheel Release
Allows unit movement without engine running.
 
Fuel Indicator
None
 
Deck Lift
Manual lift with hairpin from hole to hole for position adjustment.
 
Carb Compliant
No
 
Deck Style
Floating Deck
 
Deck Style Description
Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
 
Width / Cutting Deck
36"
 
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
 
Cutting Heights
1.5" to 4.5" in 0.5" increments
 
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
 
Blade Tip Speed
Approximately 18,500 fpm
 
Blades
2 Blades at 18.00" Length